Master electric switch - Scale 1:24

New product

Master electric switch - Scale 1:24 printed in resin 3DP technology

More details

4,25 €

More info

INSTRUCTIONS FOR SWITCHES USE:

1º Paint the corresponding color of each part of the piece.

2º Drill in the correct place on the model with a precision drill or similar, and place the corresponding decal.

3º Once the paint dries, we cut the switch to separate it from its base, and with a little glue we put it in its correct place.

INSTRUCTIONS FOR USE:

1º Cut close to the drawing without cutting it.

2º Dip the decal in water for 3-5 seconds and let it rest on an absorbent paper for about 25-30 seconds. Afterwards, the decal will detach easily from the support.

3º Manipulate it as little as possible, it will be placed in its place, and helped by a brush we will adapt it.

4º Dry the rest of the water with an absorbent paper.

5º Apply Micro Sol and / or Micro Set according to need and let dry. Finally, apply a light coat of varnish as deemed appropriate.